CNC Operator

SUMMARY:

POSITION INFO:

Junior CNC Operator - R72 .85 ph (3 Months contract) 

Key Responsibilities:

• CNC Machine Operation
• Operate CNC machines according to approved machining programs and production requirements.
• Ensure components are correctly positioned in the jaws or chuck device before engaging the machine cycle.
• Maintain a continuous flow of components from stock to the machine to avoid production interruptions.
• Ensure machining is performed within the approved cycle times.

• Operational Discipline and Safety
• Be familiar with the correct operating practices related to the specific machine(s) and work cell.
• Remain alert while operating the machine at all times.
• Avoid distractions or unnecessary discussions while the machine is in operation.
• Ensure all safety devices are operational at the start of the shift and throughout production.

• Quality Responsibility
• No machining may take place without first-off approval and signature from the Setter and Inspector after a machine reset or setup.
• Be aware of all critical dimensions and the correct use of go and no-go gauges.
• The Setter will produce the initial components and inspect them together with the Operator before full production begins.
• Once in full production, the Operator is responsible for the quality and quantity of machined components.
• Conduct visual and gauge inspections on each component removed from the machine.
• Ensure only good-quality machined components are placed into crates.
• Inspect components in each layer within the crate using the available gauges and complete the Recon sheet hourly.
• Report any deviations or quality concerns immediately to the Production Supervisor.
• When unsure about gauges, dimensions, or any part of the machining process, consult the Setter or Production Supervisor before continuing.

• Machine Care and Housekeeping
• Ensure lubrication and coolant systems are operational and functioning efficiently before and during machining operations.
• Remove shavings/chips at regular intervals to prevent blockages or machine issues.
• Clean the machine and work cell daily at the end of the shift.
• Clean and de-burr machined components before placing them into crates.

• Reporting and Communication
• Report any worn machine parts, equipment issues, or abnormal machine behavior to the Production Supervisor.
• Report machine breakdowns or maintenance concerns promptly for repair or replacement.